epicyon/deploy/i2p

#!/bin/bash

install_destination=/opt/epicyon-i2p
username='epicyon-i2p'

if [[ "$1" == 'remove' ]]; then
    echo 'Removing Epicyon i2p instance'
    systemctl stop i2pd
    if [ -f /var/lib/i2pd/tunnels.d/epicyon ]; then
        rm /var/lib/i2pd/tunnels.d/epicyon
    fi
    if [ -f /etc/i2pd/tunnels.conf.d/epicyon ]; then
        rm /etc/i2pd/tunnels.conf.d/epicyon
    fi
    rm /var/lib/i2pd/epicyon.dat
    systemctl restart i2pd

    systemctl stop "${username}.service"
    systemctl disable "${username}.service"
    rm "/etc/nginx/sites-enabled/${username}"
    rm "/etc/nginx/sites-availale/${username}"
    rm -rf ${install_destination}
    userdel -r ${username}
    echo 'Epicyon i2p instance removed'
    exit 0
fi

if [[ "$1" == 'removei2p' ]]; then
    if [ -f /usr/bin/pacman ]; then
        pacman -R --noconfirm i2pd
    else
        apt-get -y remove --purge i2pd
    fi
    rm -rf /etc/i2pd
    rm -rf /var/lib/i2pd
    if [ -f /var/log/i2pd/i2pd.log ]; then
        rm /var/log/i2pd/i2pd.log
    fi
fi

clear
echo 'Installing Epicyon on an i2p domain'

NGINX_PORT=9554
EPICYON_PORT=7158
tunnels_dir=/var/lib/i2pd/tunnels.d

# if proxychains already exists then make a copy of the
# older config
if [ -f /etc/proxychains.conf ]; then
    mv /etc/proxychains.conf /etc/proxychains.conf.old
fi

echo 'Adding Epicyon dependencies'
if [ -f /usr/bin/pacman ]; then
    pacman -Syy
    pacman -S --noconfirm python-pip python-pysocks python-cryptography \
           imagemagick python-pillow python-requests \
           perl-image-exiftool python-numpy python-dateutil \
           certbot flake8 git i2pd wget qrencode \
           proxychains midori bandit
    pip3 install pyLD pyqrcode pypng
else
    apt-get update
    apt-get -y install imagemagick python3-cryptography \
            python3-dateutil python3-idna python3-requests \
            python3-numpy python3-pil.imagetk python3-pip \
            python3-setuptools python3-socks python3-idna \
            libimage-exiftool-perl python3-flake8 python3-pyld \
            python3-django-timezone-field nginx git i2pd wget \
            python3-pyqrcode qrencode python3-png \
            proxychains midori python3-bandit
fi

if [ ! -d /etc/i2pd ]; then
    echo 'i2pd was not installed'
    exit 5
fi

echo 'Cloning the epicyon repo'
if [ ! -d ${install_destination} ]; then
    git clone https://gitlab.com/bashrc2/epicyon ${install_destination}

    if [ ! -d ${install_destination} ]; then
        echo 'Epicyon repo failed to clone'
        exit 3
    fi
fi

echo 'Adding an epicyon system user account'
if [ -f /usr/bin/pacman ]; then
    groupadd ${username}
    useradd --system -g ${username} --home-dir=${install_destination} $username
    groupadd www-data
    useradd --system -g www-data --home-dir=/srv/http www-data
else
    adduser --system --home=${install_destination} --group $username
fi

chown -R ${username}:${username} ${install_destination}

echo 'Creating a command script to obtain i2p domain names from dat files'
{ echo '#!/bin/bash';
  echo "tunnelname=\"\$1\"";
  echo 'domainfile=/tmp/i2pdomain.txt';
  echo "if [ -f \${domainfile} ]; then";
  echo "    rm \${domainfile}";
  echo 'fi';
  echo "wget http://127.0.0.1:7070/?page=i2p_tunnels -O \${domainfile} 2> /dev/null";
  echo "if [ ! -f \${domainfile} ]; then";
  echo '    exit 9';
  echo 'fi';
  echo "awk -F \">\${tunnelname}<\" '{print \$2}' < \${domainfile} | awk -F ';' '{print \$2}' | awk -F ':' '{print \$1}' | tr -d '[:space:]'";
  echo "rm \${domainfile}"; } > /usr/bin/i2pdomain
chmod +x /usr/bin/i2pdomain

echo 'Creating Epicyon i2p tunnel file'
if [ ! -d "$tunnels_dir" ]; then
    ln -s /etc/i2pd/tunnels.conf.d /var/lib/i2pd/tunnels.d
fi

if ! grep -q 'epicyon.dat' /var/lib/i2pd/tunnels.conf; then
    { echo '';
      echo '[epicyon]';
      echo 'type = http';
      echo 'host = 127.0.0.1';
      echo 'inport = 80';
      echo "port = ${NGINX_PORT}";
      echo 'inbound.length = 1';
      echo 'inbound.quantity = 5';
      echo 'outbound.length = 1';
      echo 'outbound.quantity = 5';
      echo "keys = epicyon.dat"; } >> /var/lib/i2pd/tunnels.conf
fi
rm "$tunnels_dir"/*~

echo 'Setting i2p tunnels directory'
sed -i 's|#tunnelsdir =|tunnelsdir =|g' /etc/i2pd/i2pd.conf
sed -i 's|# tunnelsdir =|tunnelsdir =|g' /etc/i2pd/i2pd.conf
sed -i "s|tunnelsdir =.*|tunnelsdir = $tunnels_dir|g" /etc/i2pd/i2pd.conf

echo 'Enabling ipv6'
if [ -f /etc/sysctl.conf ]; then
    if grep -q 'net.ipv6.conf.all.disable_ipv6' /etc/sysctl.conf; then
        sed -i 's|net.ipv6.conf.all.disable_ipv6.*|net.ipv6.conf.all.disable_ipv6 = 0|g' /etc/sysctl.conf
        /sbin/sysctl -p -q
    fi
fi
sed -i 's|#ipv6 =|ipv6 =|g' /etc/i2pd/i2pd.conf
sed -i 's|# ipv6 =|ipv6 =|g' /etc/i2pd/i2pd.conf
sed -i 's|ipv6 =.*|ipv6 = true|g' /etc/i2pd/i2pd.conf

echo 'Disabling i2p logging'
sed -i 's|#logfile =|logfile =|g' /etc/i2pd/i2pd.conf
sed -i 's|# logfile =|logfile =|g' /etc/i2pd/i2pd.conf
sed -i 's|logfile =.*|logfile = /dev/null|g' /etc/i2pd/i2pd.conf

echo 'Enabling i2p NAT traversal'
sed -i 's|#nat =|nat =|g' /etc/i2pd/i2pd.conf
sed -i 's|# nat =|nat =|g' /etc/i2pd/i2pd.conf
sed -i 's|nat =.*|nat = true|g' /etc/i2pd/i2pd.conf

if [ ! -d /run/i2pd ]; then
    mkdir /run/i2pd
fi
chown -R i2pd:i2pd /run/i2pd

#if [ -f /usr/bin/pacman ]; then
#    sed -i 's|ExecStart=.*|ExecStart=/usr/sbin/i2pd --conf=/etc/i2pd/i2pd.conf --tunconf=/etc/i2pd/tunnels.conf --tunnelsdir=/etc/i2pd/tunnels.conf.d --service|g' /lib/systemd/system/i2pd.service
#    sed -i 's|Type=.*|Type=simple|g' /lib/systemd/system/i2pd.service
#fi

echo 'Setting file permissions'
chown -R i2pd:i2pd "$tunnels_dir"
chmod 644 "$tunnels_dir"/*
chmod 755 "$tunnels_dir"
# chown -R i2pd:i2pd /etc/i2pd
systemctl daemon-reload
systemctl enable i2pd
systemctl restart i2pd

echo 'Waiting for i2p daemon restart'
sleep 5
if [ ! -f /var/lib/i2pd/epicyon.dat ]; then
    echo 'Waiting for i2p daemon restart...'
    sleep 5
fi

if [ ! -f /var/lib/i2pd/epicyon.dat ]; then
    echo '/var/lib/i2pd/epicyon.dat not created'
    exit 6
fi

echo '/var/lib/i2pd/epicyon.dat file was created'

I2P_DOMAIN=$(i2pdomain epicyon)
if [[ "$I2P_DOMAIN" != *'.i2p' ]]; then
    echo 'Epicyon i2p domain not created'
    echo "$I2P_DOMAIN"
    exit 1
fi

echo "i2p domain: http://${I2P_DOMAIN}"

echo 'Creating Epicyon daemon'
{ echo '[Unit]';
  echo "Description=$username";
  echo 'After=syslog.target';
  echo 'After=network.target';
  echo '';
  echo '[Service]';
  echo 'Type=simple';
  echo "User=$username";
  echo "Group=$username";
  echo "WorkingDirectory=${install_destination}";
  echo "ExecStart=/usr/bin/python3 ${install_destination}/epicyon.py --http --i2p --port 80 --proxy ${EPICYON_PORT} --domain ${I2P_DOMAIN} --registration open";
  echo "Environment=USER=$username";
  echo 'Environment=PYTHONUNBUFFERED=true';
  echo 'Restart=always';
  echo 'StandardError=syslog';
  echo 'CPUQuota=80%';
  echo 'ProtectHome=true';
  echo 'ProtectKernelTunables=true';
  echo 'ProtectKernelModules=true';
  echo 'ProtectControlGroups=true';
  echo 'ProtectKernelLogs=true';
  echo 'ProtectHostname=true';
  echo 'ProtectClock=true';
  echo 'ProtectProc=invisible';
  echo 'ProcSubset=pid';
  echo 'PrivateTmp=true';
  echo 'PrivateUsers=true';
  echo 'PrivateDevices=true';
  echo 'PrivateIPC=true';
  echo 'MemoryDenyWriteExecute=true';
  echo 'NoNewPrivileges=true';
  echo 'LockPersonality=true';
  echo 'RestrictRealtime=true';
  echo 'RestrictSUIDSGID=true';
  echo 'RestrictNamespaces=true';
  echo 'SystemCallArchitectures=native';
  echo '';
  echo '[Install]';
  echo 'WantedBy=multi-user.target'; } > "/etc/systemd/system/${username}.service"

systemctl daemon-reload
systemctl enable "${username}.service"
systemctl restart "${username}.service"

echo 'Creating nginx configuration'
if [ ! -f /etc/nginx/nginx.conf ]; then
    { echo 'user www-data;';
      echo 'pid /run/nginx.pid;';
      echo '';
      echo 'events {';
      echo '        worker_connections 50;';
      echo '        # multi_accept on;';
      echo '}';
      echo '';
      echo 'http {';
      echo '        # limit the number of connections per single IP';
      echo "        limit_conn_zone \$binary_remote_addr zone=conn_limit_per_ip:10m;";
      echo '';
      echo '        # limit the number of requests for a given session';
      echo "        limit_req_zone \$binary_remote_addr zone=req_limit_per_ip:10m rate=140r/s;";
      echo '';
      echo '        # if the request body size is more than the buffer size, then the entire (or partial) request body is written into a temporary file';
      echo '        client_body_buffer_size  128k;';
      echo '';
      echo '        # headerbuffer size for the request header from client, its set for testing purpose';
      echo '        client_header_buffer_size 3m;';
      echo '';
      echo '        # maximum number and size of buffers for large headers to read from client request';
      echo '        large_client_header_buffers 4 256k;';
      echo '';
      echo '        # read timeout for the request body from client, its set for testing purpose';
      echo '        client_body_timeout   3m;';
      echo '';
      echo '        # how long to wait for the client to send a request header, its set for testing purpose';
      echo '        client_header_timeout 3m;';
      echo '';
      echo '        sendfile on;';
      echo '        tcp_nopush on;';
      echo '        tcp_nodelay on;';
      echo '        keepalive_timeout 65;';
      echo '        types_hash_max_size 2048;';
      echo '        server_tokens off;';
      echo '';
      echo '        include /etc/nginx/mime.types;';
      echo '        default_type application/octet-stream;';
      echo '';
      echo '        access_log /dev/null;';
      echo '        error_log /dev/null;';
      echo '';
      echo '        gzip on;';
      echo '        gzip_disable "msie6";';
      echo '';
      echo '        include /etc/nginx/conf.d/*.conf;';
      echo '        include /etc/nginx/sites-enabled/*;';
      echo '}'; } > /etc/nginx/nginx.conf
else
    if ! grep -q 'include /etc/nginx/sites-enabled' /etc/nginx/nginx.conf; then
        echo 'include /etc/nginx/sites-enabled/*.conf;' >> /etc/nginx/nginx.conf
    fi
fi
if [ ! -d /etc/nginx/conf.d ]; then
    mkdir /etc/nginx/conf.d
fi
if [ ! -d /etc/nginx/sites-available ]; then
    mkdir /etc/nginx/sites-available
fi
if [ ! -d /etc/nginx/sites-enabled ]; then
    mkdir /etc/nginx/sites-enabled
fi

if [ -f /usr/bin/pacman ]; then
    if [ ! -f /lib/systemd/system/nginx.service ]; then
        echo 'Creating nginx daemon'
        { echo '[Unit]';
          echo 'Description=A high performance web server and a reverse proxy server';
          echo 'Documentation=man:nginx(8)';
          echo 'After=network.target nss-lookup.target';
          echo ''
          echo '[Service]';
          echo 'Type=forking';
          echo 'PIDFile=/run/nginx.pid';
          echo "ExecStartPre=$(which nginx) -t -q -g 'daemon on; master_process on;'";
          echo "ExecStart=$(which nginx) -g 'daemon on; master_process on;'";
          echo "ExecReload=$(which nginx) -g 'daemon on; master_process on;' -s reload";
          echo 'ExecStop=-/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /run/nginx.pid';
          echo 'TimeoutStopSec=5';
          echo 'KillMode=mixed';
          echo '';
          echo '[Install]';
          echo 'WantedBy=multi-user.target'; } > /etc/systemd/system/nginx.service
        systemctl enable nginx
    fi
fi

web_dir=/var/www
if [ -f /usr/bin/pacman ]; then
    web_dir=/srv/http
fi

echo "Creating nginx virtual host for http://${I2P_DOMAIN}"
{ echo 'server {';
  echo "    listen 127.0.0.1:${NGINX_PORT} default_server;";
  echo "    server_name ${I2P_DOMAIN};"
  echo '';
  echo '    gzip            on;';
  echo '    gzip_min_length 1000;';
  echo '    gzip_proxied    expired no-cache no-store private auth;';
  echo '    gzip_types      gzip_types text/plain text/css text/vcard text/vcard+xml application/json application/ld+json application/javascript text/xml application/xml application/rdf+xml application/xml+rss text/javascript;';
  echo '';
  echo '    add_header X-Content-Type-Options nosniff;';
  echo '    add_header X-XSS-Protection "1; mode=block";';
  echo '    add_header X-Download-Options noopen;';
  echo '    add_header X-Permitted-Cross-Domain-Policies none;';
  echo '';
  echo '    access_log /dev/null;';
  echo '    error_log /dev/null;';
  echo '';
  echo '    index index.html;';
  echo '';
  echo '    location /newsmirror {';
  echo "      root /var/www/${I2P_DOMAIN}/htdocs;";
  echo '      try_files $uri =404;';
  echo '    }';
  echo '';
  echo '    location / {';
  echo '      proxy_http_version 1.1;';
  echo '      client_max_body_size 31M;';
  echo "      proxy_set_header Host \$http_host;";
  echo "      proxy_set_header X-Real-IP \$remote_addr;";
  echo "      proxy_set_header X-Forward-For \$proxy_add_x_forwarded_for;";
  echo '      proxy_set_header X-Forward-Proto http;';
  echo '      proxy_set_header X-Nginx-Proxy true;';
  echo '      proxy_temp_file_write_size 64k;';
  echo '      proxy_connect_timeout 10080s;';
  echo '      proxy_send_timeout 10080;';
  echo '      proxy_read_timeout 10080;';
  echo '      proxy_buffer_size 64k;';
  echo '      proxy_buffers 16 32k;';
  echo '      proxy_busy_buffers_size 64k;';
  echo '      proxy_redirect off;';
  echo '      proxy_request_buffering off;';
  echo '      proxy_buffering off;';
  echo "      proxy_pass http://localhost:${EPICYON_PORT};";
  echo '      tcp_nodelay on;';
  echo '    }';
  echo '}'; } > /etc/nginx/sites-available/epicyon-i2p

ln -s /etc/nginx/sites-available/epicyon-i2p /etc/nginx/sites-enabled/
systemctl restart nginx

# set up socks5 proxy for browser
{ echo 'dynamic_chain';
  echo 'proxy_dns';
  echo 'remote_dns_subnet 224';
  echo 'tcp_read_time_out 15000';
  echo 'tcp_connect_time_out 8000';
  echo 'localnet 127.0.0.0/255.0.0.0';
  echo '[ProxyList]';
  echo 'http    127.0.0.1 4444';
  echo 'socks5  127.0.0.1 4447'; } > /etc/proxychains.conf

# set up a desktop icon
for d in /home/*/ ; do
    CURRUSER=$(echo "$d" | awk -F '/' '{print $3}')
    if [ -d "/home/${CURRUSER}/Desktop" ]; then
        { echo '#!/usr/bin/env xdg-open';
          echo '[Desktop Entry]';
          echo 'Name=Epicyon I2P';
          echo 'GenericName=P2P Social Network';
          echo 'Comment=P2P Social Network';
          echo "Exec=proxychains midori http://${I2P_DOMAIN}";
          echo 'Icon=org.midori_browser.Midori';
          echo 'Type=Application';
          echo 'Terminal=false';
          echo 'Categories=Internet;SocialNetwork;';
          echo 'StartupWMClass=Epicyon';
          echo 'Keywords=Epicyon;P2P;I2P;'; } > "/home/${CURRUSER}/Desktop/${username}.desktop"
        chown "$CURRUSER":"$CURRUSER" "/home/${CURRUSER}/Desktop/${username}.desktop"
    fi
done

clear
echo -n "$I2P_DOMAIN" | qrencode -t ANSI
echo 'Your Epicyon i2p instance is now installed.'
echo ''
echo 'You can view it from the terminal with the command:'
echo ''
echo '    proxychains midori'
echo ''
echo 'If you prefer Firefox then see preferences/network settings, '
echo 'manual proxy and uncheck DNS over HTTPS. In about:config and '
echo 'find the property media.peerConnection.ice.proxy_only and set '
echo 'it to true. http should be proxied through 127.0.0.1 port 4444 '
echo 'and socks5 proxied through 127.0.0.1 port 4447.'
echo ''
echo "Navigate to http://${I2P_DOMAIN} and register an account."

exit 0